Authorized Distributor of Gardner Denver Air Dryers
Energy Efficient Refrigerated Compressed Air Dryers
Pinnacle Industries is an authorized distributor of Gardner Denver refrigerated air dryers. We offer a wide selection of energy efficient refrigerated compressed air dryers. These refrigerated air dryers are engineered to benefit you today and tomorrow from the tradition of durability that is Gardner Denver.
Gardner Denver Refrigerated Air Dryers
RES Series
The RES Series refrigerated dryer automatically cycles the refrigeration compressor on and off in response to inlet load conditions. As the inlet air load is reduced, the refrigeration compressor cycles off, providing you with the ability to reduce energy and costs. The RES Series has an optimized cabinet design which promotes easy access from all four sides and the hermetically sealed refrigerant compressor provides high reliability and long service life.
- 90 – 675 SCFM
- Pressure to 250 PSIG
- Temperature to 130°F
- No air loss condensate drains
RSD 800-3000
99% effective moisture removal at all flow rates to preserve dew point stability. Standard Grade B two-stage cold filtration ensures maximum water extraction under low flow conditions. Stage one mechanically entraps solids >10 microns with dual stainless steel orifice tubes. Stage two utilizes in-depth fiber media to coalesce water droplets and retain solid particles 3 microns and larger. Rugged digital scroll compression improves efficiency, durability and reliability and lowers decibel sound levels. Simple reliable operation results from having only two parts, a fixed upper scroll and an orbiting lower scroll. Long-life Scroll-set compression sealing surfaces are impregnated to wear-in and improve with time.Design allows back-side of dryer to be placed against the wall. Connections: compressed air inlet/outlet portals are located through the roof for easy access to interior.Cooling air flow: enters one side and exhausts out the top for better ventilation and noise reduction.Easy to remove enclosure panels.Crafted from premium grade 316 stainless steel, our exclusive plate type heat exchangers maximize Energy efficiency.Pre-filtration is not required for the heat exchangers due to smooth channels that eliminate places for dirt, rust, and scale to accumulate.Integral Blow-Gun makes heat exchanger surface cleaning easy saving time and maintaining efficiency.
- 800-3000 SCFM
- Pressure to 232 PSIG
- Temperature to 120°F
- 38°F from 0%-100% of rated flow dewpoint stability
- Up to 91% power reduction
- Rebate Eligible
RSD Series 3750-12500
Furnished with integral high performance filtration and energy saving no-air-loss demand drains.Standard modules offer two stage separation removing solids of 3 micron and larger, with a remaining oil content of 4mg/m³.Optional cold coalescing filters capture solids of 0.01 micron and larger, with a remaining oil content of 0.008 mg/ m³. The controller on the RSD 3750-12500 models is an intuitive operator interface that monitors system performance, tracks energy savings and actively communicates with individual dryer modules.
- 3750 – 12500 SCFM
- Pressure to 232 PSIG
- Temperature to 130°F
- Stainless steel brazed plate heat exchangers
- Water-cooled condenser
- Digital scroll refrigeration system
- Easy to use controller
- Cold coalescing filters – optional
RHT Series
These high inlet temperature refrigerated dryers feature a unique design which works directly with reciprocating air compressors. A unique heat exchanger allows the dryer to accept elevated inlet air temperatures, up to 180°F. This allows compressed air users to send high temperature air straight from their compressor directly to the RHT Series refrigerated dryer and maintain a 50°F pressure dew point. The RHT Series is ideally suited for auto body shops, auto service centers, and light industrial facilities with 5-30 hp reciprocating air compressors.
- 20 – 125 SCFM
- Temperature up to 180°F
- Pressure up 250 PSIG
- Automatic Zero-Loss Drain
RNC Series
These non-cycling refrigerated air dryers are engineered to benefit you for a lifetime with the tradition of durability that is Gardner Denver. Quality components and engineering excellence are bonded together to ensure you of a stable 38°F pressure dew point. Gardner Denver combines reliability, cutting-edge design, and innovative packaging to supply the best air treatment package in a space saving unit. The air quality delivered from an RNC Series dryer will define the difference between moderate and superior results from your plant’s processes or systems.
All models use reliable refrigeration compressors and environmentally friendly refrigerants. Models through RNC750 use proven reciprocating refrigeration compressors with R-134a refrigerant. RNC1000 through RNC3000 incorporate rugged scroll compressors with R-404a refrigerant. You benefit from long component life and efficient 24/7 performance.
- 10-3000 SCFM
- Pressures up to 250 PSIG, Controller Dependent
- Inlet Temperatures up to: 130°F
- Integrated Grade B (3 micron) Filtering
- Optional Integrated Grade E, Cold Coalescing Filtering
- Automatic Zero-Loss Drain
- Four levels of controllers for ultimate customization
RGD Series
RPC Series
G Series
GHRN Series
GTRC Series
GMRN - GMRC Series
GSRN Series
Contact Us